From 55f277e77428d7423ae906a8e1f1324d35b07a7d Mon Sep 17 00:00:00 2001 From: Jakob Kaivo Date: Fri, 4 Mar 2022 12:32:20 -0500 Subject: import Miranda 2.066 from upstream --- miralib/manual/31/1 | 92 ++++++++++++++++++++++++ miralib/manual/31/2 | 138 +++++++++++++++++++++++++++++++++++ miralib/manual/31/3 | 42 +++++++++++ miralib/manual/31/4 | 175 +++++++++++++++++++++++++++++++++++++++++++++ miralib/manual/31/5 | 105 +++++++++++++++++++++++++++ miralib/manual/31/6 | 38 ++++++++++ miralib/manual/31/7 | 160 +++++++++++++++++++++++++++++++++++++++++ miralib/manual/31/8 | 83 +++++++++++++++++++++ miralib/manual/31/9 | 54 ++++++++++++++ miralib/manual/31/contents | 12 ++++ 10 files changed, 899 insertions(+) create mode 100644 miralib/manual/31/1 create mode 100644 miralib/manual/31/2 create mode 100644 miralib/manual/31/3 create mode 100644 miralib/manual/31/4 create mode 100644 miralib/manual/31/5 create mode 100644 miralib/manual/31/6 create mode 100644 miralib/manual/31/7 create mode 100644 miralib/manual/31/8 create mode 100644 miralib/manual/31/9 create mode 100644 miralib/manual/31/contents (limited to 'miralib/manual/31') diff --git a/miralib/manual/31/1 b/miralib/manual/31/1 new file mode 100644 index 0000000..388cc0d --- /dev/null +++ b/miralib/manual/31/1 @@ -0,0 +1,92 @@ +_I_n_p_u_t_ _f_r_o_m_ _U_N_I_X_ _f_i_l_e_s_ _e_t_c_. + +The following Miranda functions provide an interface to the UNIX file +system from within Miranda expressions: + + read :: [char]->[char] +This takes a string valued argument, which it treats as a UNIX pathname, +and returns the contents of the file or device of that name, also as a +string (i.e. as a list of characters). There is no end-of-file +character, the termination of the file is indicated simply by the end of +the list of characters. The Miranda evaluation terminates with an error +message if the file does not exist or the user does not have read +permission for it. + +A special case - the notation `$-' denotes the contents of the standard +input, as a list of characters. Note that multiple occurrences of `$-' +always denote a single shared input stream. So for example ($- ++ $-) +reads one lot of data from the terminal and duplicates it. + +(See separate subsection on Input/Output of binary data for the binary +versions readb and $:-) + + filemode :: [char]->[char] +Takes a pathname and returns a string representing the access +permissions of the current process to the file of that name. The string +is empty if the file does not exist, otherwise it is of length four +containing, in order, the following characters - 'd' if the file is a +directory, 'r' if it is readable, 'w' if it is writeable, 'x' if it is +executable. Each character not applicable is replaced by '-'. So for +example "drwx" is the filemode of a directory with all access +permissions, while "-rw-" is the filemode of a normal file with read and +write but no execute permission. + + getenv :: [char]->[char] +Looks up the string associated with a given name in the current UNIX +environment (see man (2) getenv in the UNIX manual system). For example + getenv "HOME" +returns the name of the current home directory. Returns the empty +string if the given name not present in the environment. + + system :: [char]->([char],[char],num) +The effect of `system string' is that a UNIX process is forked off to +execute `string' as a shell command (by `/bin/sh'). The result of the +call to `system' is a triple containing the standard output, error +output, and exit_status, respectively, resulting from the execution of +the UNIX command. (The exit_status of a UNIX command is a number in the +range 0..127, with a non-zero exit status usually indicating some kind +of abnormal event.) Note that inspecting the exit_status will force the +Miranda process to wait until the execution of the shell command has +completed - otherwise the two processes proceed concurrently. + +If the attempt to set up a shell process fails, `system' returns the +result ([],errmess,-1), where errmess is an error message. + +WARNING - the function `system' provides a very general interface to +UNIX. Obviously, this can be abused to cause the evaluation of a +Miranda expression to have side effects on the state of the filing +system. It is not intended to be used in this way - `system' should be +used only to _o_b_t_a_i_n _i_n_f_o_r_m_a_t_i_o_n about the state of the world. If you +wish to change the state of the world, this should be done by placing a +`System' message in your output list (see next manual section). + +Since reading data from the terminal would constitute a side effect, the +background process created by `system' comes into being with its +standard input closed. + +_I_m_p_l_e_m_e_n_t_a_t_i_o_n_ _R_e_s_t_r_i_c_t_i_o_n + `read', `filemode', `getenv', and `system' all require their argument +to be at most 1024 characters long. + +_N_o_t_e_ _o_n_ _s_y_s_t_e_m_ _r_e_a_d_i_n_g_ _f_u_n_c_t_i_o_n_s_ _a_n_d_ _r_e_f_e_r_e_n_t_i_a_l_ _t_r_a_n_s_p_a_r_e_n_c_y + +Although `read', `filemode', `getenv' do not have side effects, they are +not referentially transparent because it cannot be guaranteed that an +expression like + read "file" +will return the same result if evaluated twice. Some external event may +have changed the state of the filing system in the meantime. Clearly +the same problem applies to `system' - consider for example the +expression + system "date" +which gets date-and-time as a string. Evaluating this twice in +succession is unlikely to produce the same result. + +Strictly speaking all calls to `read' and the other functions in this +section ought to be evaluated with respect to the state-of-the-world as +it existed before the evaluation of the given Miranda expression +commenced. Otherwise referentially transparent behaviour cannot be +guaranteed. Enforcing this would appear to require, among other things, +taking a copy of the whole filing system before each Miranda +command-level evaluation. For obvious reasons this is not implemented. + diff --git a/miralib/manual/31/2 b/miralib/manual/31/2 new file mode 100644 index 0000000..9348cc5 --- /dev/null +++ b/miralib/manual/31/2 @@ -0,0 +1,138 @@ +_O_u_t_p_u_t_ _t_o_ _U_N_I_X_ _f_i_l_e_s_ _e_t_c_. + +Since Miranda is a functional language, the evaluation of an expression +cannot in itself cause a side effect on the state of the world. The +side effects occur when the value of the expression is printed. The +value of a command level expression is a list of `system messages', +where the possible forms of message are shown by the following type +declaration, + + sys_message ::= Stdout [char] | Stderr [char] | Tofile [char] [char] | + Closefile [char] | Appendfile [char] | System [char] | + Exit num | Stdoutb [char] | Tofileb [char] [char] | + Appendfileb [char] + +The system `prints' such a list of messages by reading it in order from +left to right, evaluating and obeying each message in turn as it is +encountered. The effect of the various messages is as follows. + + Stdout string +The list of characters `string' is transmitted to the standard output, +which will normally be connected to the user's screen. So for example +the effect of obeying + [Stdout "!!!"] +is that three exclamation marks appear on the screen. + + Stderr string +The list of characters `string' is sent to the standard error output. +[Explanation to those unfamiliar with UNIX stream philosophy: all normal +UNIX processes come into existence with a standard input stream, and two +output streams, called standard out and standard error respectively. +Under normal circumstances standard error and standard out are both +connected to the users screen, but in principle they could be connected +to different places.] + + Tofile fil string +The characters of the string are transmitted to the file or device whose +UNIX pathname is given by `fil'. Successive `Tofile' messages to the +same destination are appended together (i.e. the first such message +causes the file to be opened for writing, and it remains open until the +end of the whole message list). Note that opening a file for output +destroys its previous contents (unless preceded by an `Appendfile' +message, see below). + + Closefile fil +The stream which has been opened to the file `fil' (presumably the +subject of some previous `Tofile' messages) is closed. If `fil' was not +in fact open this command has no effect (i.e. is harmless). All +open-for-output streams are automatically closed at the end of a +message-list evaluation, so it is only necessary to invoke `Closefile' +explicitly if you wish to terminate output to given file during a +message-list evaluation. (One reason why you might want to do this is +so as not to have too many output files open at one time, since many +UNIX systems place a limit on the number of streams which a process can +have.) + + Appendfile fil +If obeyed before any `Tofile' messages to destination `fil', causes the +file to be opened in `append-mode', so its previous contents are added +to, instead of being replaced. + +See separate subsection on Input/Output of binary data for explanation +of the binary versions Stdoutb, Tofileb, Appendfileb. + + System string +Causes `string' to be executed as a shell command (by `/bin/sh') at this +point in time. Enables arbitrary UNIX commands to be invoked from +within a Miranda output list. The shell process comes into being with +its streams (standard input, standard output, standard error) inherited +from the Miranda process. + + Exit num +Causes the UNIX process evaluating the message list to terminate at this +point with exit status `num' (an integer between 0 and 127). The +remaining messages in the list (if any) are discarded. The exit status +of a Miranda evaluation which terminates other than by a call to Exit +will be 0 if it terminates successfully or 1 if it encounters a runtime +error. The exit status is only relevant if you are using Miranda to +implement a stand-alone UNIX command (see separate manual page about +this). + +[Explanation: the exit status of a UNIX command is a one byte quantity +which is communicated back to the calling shell and can be tested by it +- the usual convention is that 0 exit status means all ok, anything else +means something was amiss. If you are not into shell programming you +can safely ignore the whole issue.] + +_T_h_e_ _d_e_f_a_u_l_t_ _o_u_t_p_u_t_ _m_e_c_h_a_n_i_s_m + +We have stated above that the value of a command level expression is +expected to be of type `[sys_message]'. + +If it is not of that type mira applies the following rules: + (i) if the value is of type [char] the characters are directed to +standard output, as if you had written [Stdout (expr)]. + (ii) if it is of another type, show is first applied to convert it to +type [char], so it is as if you had written [Stdout (show (expr))] + +This explains how the Miranda system is able to function in its standard +`desk-calculator' mode. + +Be aware that if is not loaded (because you invoked mira with +-stdenv, and the script does not explicitly %include there will +be no type sys_message and only the default output mechanism will be +available. + +_O_u_t_p_u_t_ _r_e_d_i_r_e_c_t_i_o_n + +A Miranda command of the form + exp &> pathname +causes a background process to be set up for the evaluation of `exp', +with both the standard output and the standard error output of the +process redirected to `pathname'. If `exp' is of type [sys_message], +the destination of `Tofile' messages are not affected by the global +redirection - only messages which would otherwise have gone to the +screen are sent to `pathname'. + +If two (blank separated) pathnames are given after the `&>', standard +output is redirected to the first file and standard error to the second. +Thus: + exp &> outfil errfil + +If the `&>' is replaced by a `&>>', instead of overwriting the previous +contents, the relevant output is appended to the end of the file. Thus: + exp &>> pathname(s) +As with the `&>' command, either one or two pathnames can be given, +depending on whether you wish standard error to be merged with standard +out, or separated from it. + +Note that a background process created by a `&>' or `&>>' command has no +standard input - if the expression contains `$-', the latter will +evaluate to `[]'. + +_I_m_p_l_e_m_e_n_t_a_t_i_o_n_ _R_e_s_t_r_i_c_t_i_o_n_s + Arguments representing pathnames (to Tofile, Appendfile, Closefile) are +restricted to 1024 characters in length - pathnames longer than this +cause an error message. The shell command supplied to System is also +restricted to 1024 characters in length. + diff --git a/miralib/manual/31/3 b/miralib/manual/31/3 new file mode 100644 index 0000000..1746682 --- /dev/null +++ b/miralib/manual/31/3 @@ -0,0 +1,42 @@ +_R_e_a_d_i_n_g_ _w_i_t_h_ _i_n_t_e_r_p_r_e_t_a_t_i_o_n_ _(_`_r_e_a_d_v_a_l_s_'_ _a_n_d_ _`_$_+_'_) + +There is a function _r_e_a_d_v_a_l_s which takes a string representing a UNIX +pathname, and returns a list of values found in the file of that name. +The values may be represented by arbitrary Miranda expressions, written +one per line. Blank lines, and Miranda style comments (||...) are +ignored. If the input file appears to be a teletype, _r_e_a_d_v_a_l_s reacts to +syntactically incorrect or wrongly typed data by prompting the user to +repeat the line, and such bad values are omitted from the result list. +If the input file does not appear to be a teletype, bad data causes +readvals to abort with an error message. + +Note that, similarly to _s_h_o_w + (i) _r_e_a_d_v_a_l_s is a reserved word, not an identifier. + (ii) the context in which it is used must be such as to determine its +type monomorphically. Extra type specifications may be needed in the +script to meet this condition. + +Here is a simple example of how _r_e_a_d_v_a_l_s might be used in a script + x :: [num] + x = readvals "data" +The file `data' should contain expressions of type num (one per line). + +The _r_e_a_d_v_a_l_s function provides Miranda with a simple form of data +persistence - data can be written to a file (e.g. using `_s_h_o_w') and read +back using _r_e_a_d_v_a_l_s in a later session. Data objects saved in this way +must of course be finite. Notice also that if you wish to save data +containing functions, you will have to set up some special arrangement, +since such data cannot be written out using `_s_h_o_w'. + +Data of abstract type can be written to file using _s_h_o_w and read back +with _r_e_a_d_v_a_l_s - provided that an appropriate show-function was included +in the signature of the abstract type (see manual section on abstract +types). + +Finally note that $+ behaves exactly like an application of _r_e_a_d_v_a_l_s to +the name of the file to which the standard input is connected. For +example + sum $+ +read a sequence of numeric expressions from the keyboard (one per line) +up to the next control-D, and then returns their sum. + diff --git a/miralib/manual/31/4 b/miralib/manual/31/4 new file mode 100644 index 0000000..5378454 --- /dev/null +++ b/miralib/manual/31/4 @@ -0,0 +1,175 @@ +_U_s_i_n_g_ _M_i_r_a_n_d_a_ _t_o_ _b_u_i_l_d_ _e_x_e_c_u_t_a_b_l_e_ _f_i_l_e_s + +FIRST METHOD (using a `magic string') + +Create a file, prog.m say, containing a normal miranda script, but with +first line + #! /usr/bin/mira -exec + +The first two characters must be "#!" followed by an optional space and +the absolute pathname of the miranda interpreter. This may be somewhere +other than /usr/bin/mira, the UNIX shell command "which mira" should +tell you where it is. The flag "-exec" is necessary and no other flags +should be added. (Note "-exec2" can be substituted for "-exec", see +below.) + +The remainder of the file can be any legal miranda script, which may +%include other scripts. Somewhere in the file, or in an included file, +there must be a definition of `main'. When `prog.m' is executed as a +UNIX command, the result will be that `main' is evaluated, using the +same rules as if you had entered it in an interactive session, and the +results sent to standard output. Remember to give the file execute +permission (e.g. by saying `chmod +x prog.m'). + +A command of this form can take data from the terminal. The notation +`$-' can be used anywhere in the second and later lines of the file to +denote the list of characters taken from the standard input. (That is +`$-' behaves like a Miranda identifier of type [char].) + +The command can be invoked with arguments, eg + prog.m fig 23 +and the notation `$*' can be used in the script as a Miranda identifier +of type [[char]] denoting the argument list, with the convention that +the initial (zero'th) argument is the name of the command. So in this +case the value of `$*' would be + ["prog.m","fig","23"] +If there are no arguments, `$*' will be a singleton list containing just +the command name. + +_E_x_p_l_a_n_a_t_i_o_n + The line beginning `#!' is a standard UNIX incantation, called a `magic +string', indicating that the following pathname is an interpreter to be +invoked with the name of the file in which it occurs as argument (see +under `execve' in section 2 of the UNIX manual). The flag "-exec" +instructs the Miranda system to evaluate `main', which can be of any +type. If main is a string this is sent to stdout, if it is of another +printable type `show main' is sent to stdout, or if main is of type +[sys-message] the sequence of I/O commands is executed. + +Examples + Here is the Miranda "hello world" program + #! /usr/bin/mira -exec + main = "hello world\n" + +The following script is a Miranda version of the UNIX `cat' command - if +it is invoked without arguments it simply copies its standard input to +its standard output, otherwise it concatenates the contents of its +argument files to the standard output. + #! /usr/bin/mira -exec + + main = [Stdout $-], _i_f tl $* = [] + = [Stdout (concat(map read(tl $*)))], _i_f badargs=[] + = [Stderr (concat(map errmess badargs))], _o_t_h_e_r_w_i_s_e + badargs = [f|f<-tl $*;~member(filemode f)'r'] + errmess f = f++": cannot access\n" + +See the manual pages on input from UNIX files and output to UNIX files +for the explanation of `read', `filemode' and the constructors Stdout, +Stderr etc. + +The rule that Miranda source files must have names ending in ".m" is not +enforced for "magic" scripts, in keeping with the UNIX convention that +executables require no special suffix. However a magic script whose +name ends in ".m" can also be made the subject of a miranda session. +This is advantageous during development, as individual definitions can +be tested. A first line beginning #! is ignored by the Miranda compiler +which treats it as a comment. In this situation $* has the value [], +since the script was not executed as a command. + +Note also that if your Miranda executable file has the ".m" suffix, a +corresponding ".x" file will be created at its first call, avoiding the +need for mira to recompile it on subsequent calls (unless there has been +an update of the source file). + +Notes + (1) In some UNIX-like systems `execve' places a limit on the total +length of the `magic string'. + (2) Because in many systems (including Linux) `execve' permits at most +one flag in a magic string, mira does not understand a `-lib' flag given +in conjunction with a `-exec' flag. This is a possible source of +difficulty if you keep the miralib directory at a non-standard place. +One way round this is to set environment variable MIRALIB, instead of +using a `-lib' flag. See manual section on flags etc. [To do: more +general mechanism to add other flags to -exec in a magic string - DT] + (3) If called from the UNIX command line, + mira -exec script.m +will find and evaluate `main' in script.m and in this situation you can +combine -exec with other flags, -lib miralib, -heap N, etc preceding the +name of the script. Any additional arguments following script.m will +be found in $*. + +_D_e_b_u_g_g_i_n_g_ _s_t_a_n_d_-_a_l_o_n_e_ _s_c_r_i_p_t_s + As an aid to debugging a variant flag is available: + #!/usr/bin/mira -exec2 + definitions... +The -exec2 flag has the same effect as -exec but runtime errors (only, +not compile time errors) are redirected to file miralog/prog, where prog +is the name of the script. The redirection takes place if a miralog +directory exists in the current working directory and the process +running the script has write permission to it. This is useful for +debugging cgi scripts written in Miranda, particularly in the not +infrequent situation that they compile without errors and seem to work +fine from the command line but fail when invoked by an http call. (You +will need to create a directory miralog in cgi-bin and chown it to +apache, or whatever personality cgi scripts run as). + +SECOND METHOD (using a `here document') + +Create a file ("prog' say) containing the following + + mira [script] <> is in quotation marks, eg + mira [script] <<"!" + stuff + ! +then no substitutions will take place inside the here-document. + +The drawbacks of commands built in this way are two - (a) they have no +way of taking information from the terminal during execution (because +the here-document replaces the standard input) and (b) the method of +access to command line arguments is clumsy. + diff --git a/miralib/manual/31/5 b/miralib/manual/31/5 new file mode 100644 index 0000000..546724d --- /dev/null +++ b/miralib/manual/31/5 @@ -0,0 +1,105 @@ +_H_o_w_ _t_o_ _c_h_a_n_g_e_ _t_h_e_ _d_e_f_a_u_l_t_ _e_d_i_t_o_r + +The Miranda /edit or /e command (see manual page on Miranda command +interpreter) invokes an editor. By default this is the screen editor +"vi", but if you wish to use another editor, this is easily changed. + +The Miranda command + /editor + +reports the editor currently in use by the Miranda system. To change it +to (for example) pico, say + /editor pico + +Alternatively, when next invoking the miranda system from UNIX you can +supply it with a flag requesting a specific editor by name, as follows: + mira -editor pico + +In either case it is only necessary to do this once since the Miranda +system stores this and other information in a file called ".mirarc" in +your home directory - you should not remove or try to edit this file. + +You can select any editor that is installed on your system. If you are +unfamiliar with vi and haven't an editor in mind, the editor pico (if +installed) is particularly easy to use - it has instructions on screen. +Similar are nano (an open source clone of pico) and joe. Other editors +include emacs and gvim - these both open a separate editor window. + +The editor you select will be used by both the /e command and by + ??identifier +which opens the relevant source file at the definition of identifier. + +_M_o_r_e_ _a_d_v_a_n_c_e_d_ _i_n_f_o_r_m_a_t_i_o_n + +The Miranda system is designed to work with an editor which can open a +file at a specified line number. For example to make the editor `vi' +open `file' at line 13, the UNIX command is + vi +13 file +the Miranda system has built in knowledge of this, so if the installed +editor is `vi' and the compiler has found a syntax error in the script, +the `/e' command will open the script at the line containing the error. + +To retain this ability when substituting another editor, the `/editor' +command requires a template for invoking the chosen editor at a given +line number. In this template the line number is represented by the +character `!' and the filename by `%'. For example the full template +for `vi' would be supplied as follows + /editor vi +! % + +If the `%' character does not occur in the template, Miranda will add +the name of the file at the end of the command. So the template for +`vi' could equally well be given as + /editor vi +! +The same formula works for pico, nano, joe. If the editor is one that +starts up its own window, separate from the Miranda session window (gvim +and emacs do this), you will want to make the editor run as a concurrent +process by putting "&" at the end of the command, thus + /editor emacs +! % & +Note that in this case you must include % where the filename goes, +because adding it after the "&" would not make sense. + +In fact Miranda has built in knowledge of vi, pico, nano, joe, emacs and +gvim, so just giving the name of the editor will generate the correct +template in these cases. + +If you install an editor without the capability to be opened at a +specified line number (i.e. you cannot give a template for it +containing the `!' character), the /e command loses its ability to go to +the right place after an error, and the `??' command will be disabled. + +The Miranda system will work without either of these features, but there +is a significant loss of power in the user interface. + +If the installed editor lacks the `open at line number' feature, you may +find it convenient to have the script listed to the screen during +compilation (this feature of the compiler can be switched on and off by +the commands `/list', `/nolist'). As an assistance to naive users, the +Miranda system turns on `/list' for you if the `/editor' command is used +to install an editor without the `open at line number' feature. + +[Pathological case: if the editor command you wish to install contains a +literal `!' or `%' that you don't want replaced, place a backslash +before the relevant ! or %. This protects it from being expanded.] + +_C_h_e_c_k_i_n_g_ _f_o_r_ _s_o_u_r_c_e_ _u_p_d_a_t_e_s + +If during a session changes have been made to any relevant source file, +the Miranda system automatically recompiles the current script and any +other scripts which it directly or indirectly `%includes' and which have +been changed. At a minimum this check is performed after each /edit +command and after each shell escape. + +A mode of operation possible on a windowing system is to keep an editor +window and Miranda session window both open. In this case more frequent +checking is appropriate and you should say /recheck (see 6 "Summary of +remaining commands"). This sets a flag which tells the Miranda +interpreter to check for source file updates before each evaluation, +instead of only after /e and ! commands. But remember that you will +need to save any edits to file before the `mira' session can see them. + +As an assistance to naive users /recheck is automatically turned on if +/editor is used to install an editor template which includes "&", the +symbol used in UNIX shell commands to start a concurrent process. + +Say /norecheck to revert to the default behaviour. + diff --git a/miralib/manual/31/6 b/miralib/manual/31/6 new file mode 100644 index 0000000..d088c79 --- /dev/null +++ b/miralib/manual/31/6 @@ -0,0 +1,38 @@ +_H_o_w_ _t_o_ _a_l_t_e_r_ _t_h_e_ _s_i_z_e_s_ _o_f_ _w_o_r_k_s_p_a_c_e_s + +The Miranda system uses two main internal workspaces called "heap" and +"dic". If either overflows during a session, a self explanatory error +message is given. The sizes of both areas may changed by the user if +required. Any change made is remembered thereafter and for subsequent +sessions until countermanded. + +The heap contains almost all the data structures created both by the +Miranda compiler and the evaluation system. To compile and/or run very +large scripts you may need a bigger heap. To find out (change) the +current size of the heap say + /heap (or /heap newsize e.g. /heap 2000000 ) + +The heap size may also be altered by using a flag (see below). You +should be aware that running Miranda processes with a very large heap +may give you slower responses. + +The dictionary is used to store identifiers and file names by the +Miranda compiler. It is unlikely that you will need to change the size +of the dictionary. The current size of the dictionary can be +ascertained by the command + /dic + +it cannot be changed dynamically, from within the Miranda system. To +alter the dictionary size use a flag (see next para). + +The sizes of either or both areas may be set by flags when invoking the +miranda system. The following shows both possibilities + mira -dic 80000 -heap 2000000 [script] + +Note that the size of the heap is given in `cells' (a cell is 9 bytes, +currently) and the size of the dictionary is in bytes. + +The most recent settings of the workspace sizes are stored in the file +".mirarc" in the users home directory, and automatically carried over to +the next miranda session. + diff --git a/miralib/manual/31/7 b/miralib/manual/31/7 new file mode 100644 index 0000000..ae6b20c --- /dev/null +++ b/miralib/manual/31/7 @@ -0,0 +1,160 @@ +_O_p_t_i_o_n_s_,_ _s_e_t_u_p_ _f_i_l_e_s_ _e_t_c_. + +The full form of the `mira' command is + mira [flags...] [script] +this command causes a Miranda session to be entered with the given file +as current script. If no script is specified a default filename +`script.m' is assumed. The specified file need not yet exist - in this +case you will be starting a Miranda session with an empty current +script. + +Note that `.m' is the standard extension for Miranda language source +files - the mira command always adds the `.m' extension, if missing, to +any filename argument denoting a Miranda script. + +The available options are: + + -lib pathname +Tells mira to find miralib (directory containing libraries, manual pages +etc.) at `pathname'. The default is to look for miralib of same version +number as the program at `/usr/lib/miralib', `/usr/local/lib/miralib' +and `./miralib', in that order. The -lib flag overrides the version +number check. The same effect is obtained by setting an environment +variable MIRALIB, see next manual section. + + -gc +Switches on a flag causing the garbage collector to print information +each time a garbage collection takes place. This flag can also be +switched on and off from within the miranda session by the commands +`/gc', `/nogc'. + + -count +Switches on a flag causing statistics to be printed after each +expression evaluation. This flag can also be switched on and off from +within the miranda session by the commands `/count', `/nocount'. + + -list + -nolist +Switches on (off) a flag causing Miranda scripts to be listed to the +screen during compilation. This flag can also be switched on and off +from within the miranda session by the commands `/list', `/nolist'. + + -nostrictif +Enables the compiler to accept old Miranda scripts with missing +occurrences of the keyword `if' in guard syntax. Probably obsolete but +retained just in case someone needs it. + + -hush + -nohush +The miranda system decides whether or not to give prompts and other +feedback by testing its standard input with `isatty'. If the standard +input does not appear to be a terminal it assumes that prompts would be +inappropriate, otherwise it gives them. In either case this behaviour +can be overriden by an explicit flag ("-hush" for silence, "-nohush" for +prompts etc). This switch is also available from within a miranda +session by the commands `/hush', `/nohush'. + + -dic SIZE +Causes the dictionary (used by the compiler to store identifiers etc.) +to be set up with SIZE bytes instead of the default 24kb. + + -heap SIZE +Causes the heap to be set up with SIZE cells instead of the default +(currently 100k). This can also be done from within the miranda session +by the command `/heap SIZE'. A cell currently occupies 9 bytes. + + -editor name +Causes the resident editor (initially `vi', unless the environment +variable EDITOR was set to something else) to be `name' instead. This +can also be done from within the miranda session by the command `/editor +name'. + + -UTF-8 + -noUTF-8 +Assume the current locale is (is not) UTF-8 overriding environment vars +(version 2.044 and later). + + -stdenv +Run mira without loading the standard environment. Every script that +needs functions from the standard environment will then have to either +explicitly %include or define the required functions for +itself. Not recommended as normal practice since it may have unexpected +consequences (for example I/O will be limited by the absence of type +sys-message). + + -object +Used for debugging the compiler. Modifies behaviour of ?identifier(s) +to show the associated combinator code, which may or may not be +comprehensible as there is no documentation other than the source code. + +_S_P_E_C_I_A_L_ _C_A_L_L_S + In addition the following special calls to `mira' are available which +do not enter a Miranda session but accomplish another purpose, as +described below. + + mira -man +To enter the miranda online manual system directly from the UNIX shell. + + mira -exp +Special call permitting the use of miranda script as a stand-alone UNIX +command. See separate manual page for details. + + mira -log +Same as -exp except that it redirects stderr to a file log/mira.errors, +if log directory exists in the current directory and mira has write +permission to it. + + mira -make [sourcefiles] +Forces a check that all the miranda source files listed have up-to-date +object code files, triggering compilation processes if necessary (see +manual subsection on the library mechanism: separate compilation). + + mira -exports [sourcefiles] +Sends to stdout a list of the identifiers exported (see manual +subsection on library mechanism: separate compilation) from each of the +given miranda source files, together with their types (may also force +recompilation if needed). + + mira -sources [sourcefiles] +Sends to stdout a list of all the Miranda source files on which the +given source files directly or indirectly depend (via %include or +%insert statements), excluding the standard environment . + + mira -version +Gives version information. This information can also be obtained from +within a Miranda session by the command `/version'. + + mira -V +More detailed version information. + +_S_E_T_U_P_ _F_I_L_E_S + +The current settings of _d_i_c, _h_e_a_p and _e_d_i_t_o_r are saved in the file +`.mirarc' in the users home directory, and are thereby carried over to +the next miranda session. The settings of the compiler flag which +controls whether or not source is listed to the screen during +compilation (toggled by the commands _/_l_i_s_t _/_n_o_l_i_s_t during a Miranda +session) and of the flag which controls the frequency of checking for +source updates (toggled by the commands /recheck /norecheck) are also +saved in the users `.mirarc' file. + +The default settings of these entities, which will be picked up by new +users executing `mira' for the first time, are dic 24000 (bytes), heap +100000 (9-byte cells), editor _v_i, nolist, norecheck. The current +settings can be interrogated from a Miranda session by the command +`/settings' or `/s'. + +The defaults can be changed, on a system wide basis, by moving a copy of +a `.mirarc' file containing the desired settings into the `miralib' +directory (normally found at /usr/lib/miralib). The user's local +.mirarc file, once created in his home directory by the first call to +mira, will override the global one, however. + +The behaviour of the `mira' program is also sensitive to the settings of +certain environment variables - see separate manual entry about this. + +_O_U_T_P_U_T_ _B_U_F_F_E_R_I_N_G + Output from the Miranda system to the user's terminal should not be +line buffered, or some things will not work as they are intended. There +is no problem about input being line buffered, however. + diff --git a/miralib/manual/31/8 b/miralib/manual/31/8 new file mode 100644 index 0000000..7b35202 --- /dev/null +++ b/miralib/manual/31/8 @@ -0,0 +1,83 @@ +_E_n_v_i_r_o_n_m_e_n_t_ _v_a_r_i_a_b_l_e_s_ _u_s_e_d_ _b_y_ _M_i_r_a_n_d_a + (This section may be of particular interest to installers and system +administrators) + +The behaviour of the `mira' program is sensitive to the settings of +certain environment variables. + +An alternative location for the miralib directory may be specified by +setting the environment variable "MIRALIB". An explicit -lib flag, if +present, overrides this. + +The first time it is called (i.e. if no .mirarc file is present, either +in the home directory or in miralib) the miranda system picks up the +name of the resident editor from the environment variable EDITOR - if +this is not set it assumes `vi'. + +At startup (version 2.044 and later) `mira' inspects LC_CTYPE or if that +is empty LANG, to determine if it is running in a UTF-8 locale. On +Windows/Cygwin this information is taken from the "user-default ANSI +code page". The flag -UTF-8 or -noUTF-8, if present, overrides. + +If the environment variable RECHECKMIRA is set (to any non-empty string) +the Miranda system rechecks to see if any relevant source files have +been updated, and performs any necessary recompilation, before each +interaction with the user - this is the appropriate behaviour if an (eg +emacs) editor window is being kept open permanently during the Miranda +session. If this environment variable is not set, the check is +performed only after `/e' commands and `!' escapes. + +To decide what shell to use in `!' escapes, mira looks in the +environment variable SHELL (this will normally contain the name of the +user's login shell). If no SHELL is entered in the environment, /bin/sh +is assumed. + +If environment variable MIRAPROMPT is set, its contents will be used as +the session prompt, instead of the default prompt "Miranda " (version +2.044 and later). + +If the environment variable NOSTRICTIF is set (to any non-empty string) +Miranda accepts old scripts with no `if' after the guard comma. + +For displaying pages of the manual mira uses the program entered in the +environment as VIEWER - if this variable is not set the default is +likely to be 'more -d' or (roughly equivalent) 'less -EX'. + +If you set VIEWER to something, you may also need to set an environment +variable RETURNTOMENU. + +RETURNTOMENU=YES prevents another prompt being given after displaying +each section, causing instead an immediate return to contents page. It +should be `YES' if VIEWER is a program that pauses for input at end of +file (eg "less"), `NO' if VIEWER is a program that quits silently at end +of file (eg "more", "less -EX"). + +Finally note that a third environment variable MENUVIEWER can be set to +choose the program used to display contents pages (by default this is +normally 'cat' or 'more'). + +To find the current settings of these display commands enter + ??? +to the "next selection" prompt of the manual system. + +_H_o_w_ _t_o_ _s_e_t_ _a_n_ _e_n_v_i_r_o_n_m_e_n_t_ _v_a_r_i_a_b_l_e_ _i_n_ _y_o_u_r_ _U_N_I_X_ _s_h_e_l_l_: + (Reminder/tutorial information) + +Example, setting the environment variable VIEWER to /usr/local/view + + (i) if you use a Bourne-like shell (sh ksh bash) + say at the UNIX command level (i.e. before calling Miranda) + + export VIEWER=/usr/local/view + + to undo the above say `unset VIEWER', + to make permanent add this line to your .profile or .bashrc + + (ii) if you use a C shell (csh tcsh) + say at the UNIX command level (i.e. before calling Miranda) + + setenv VIEWER /usr/local/view + + to undo the above say `unsetenv VIEWER', + to make permanent add the setenv line to your .login or .cshrc + diff --git a/miralib/manual/31/9 b/miralib/manual/31/9 new file mode 100644 index 0000000..8e6bb2d --- /dev/null +++ b/miralib/manual/31/9 @@ -0,0 +1,54 @@ +_I_n_p_u_t_/_o_u_t_p_u_t_ _o_f_ _b_i_n_a_r_y_ _d_a_t_a + +From version 2.044 Miranda stdenv.m includes a function + readb :: [char]->[char] +and new sys-message constructors + Stdoutb :: [char]->sys_message + Tofileb :: [char]->[char]->sys_message + Appendfileb :: [char]->[char]->sys_message + +These behave similarly to (respectively) read, Stdout, Tofile, +Appendfile but are needed in a UTF-8 locale for reading/writing binary +data (for further explanation see below). In a non UTF-8 locale they do +not behave differently from read, Stdout etc but you might still prefer +to use them for handling binary data, for portability reasons. + +The notation $:- is used for the binary version of the standard input. +In a non UTF-8 locale $:- and $- will produce the same results. It is +an error to access both $:- and $- in the same evaluation. + +_E_x_p_l_a_n_a_t_i_o_n + +The locale of a UNIX process is a collection of settings in the +environment which specify, among other things, what character encoding +is in use. To see this information use `locale' as a shell command. +The analogous concept in Windows is called a "code page". + +UTF-8 is a standard for encoding text from a wide variety of languages +as a byte stream, in which ascii characters (codes 0..127) are +represented by themselves while other symbols are represented by a +sequence of two or more bytes: a `multibyte character'. + +The Miranda type `char' consists of characters in the range (0..255) +where the codes above 127 represent various accented letters etc +according to the conventions of Latin-1 (i.e. ISO-8859-1, commonly used +for West European languages). There are national variants on Latin-1 +but since Miranda source, outside comments and string and character +constants, uses only ascii this does not normally cause a problem. + +In a UTF-8 locale: on reading string/character literals or text files +Miranda has to translate multibyte characters to the corresponding point +in the Latin-1 range (128-255). If the text does not conform to the +rules of UTF-8, or includes a character not present in Latin-1, an +"illegal character" error occurs. On output, Miranda strings are +translated back to UTF-8. + +If data being read/written is not text, but binary data of some kind, +translation from/to UTF-8 is not appropriate and could cause "illegal +character" errors, and/or corruption of data. Whence the need for the +byte oriented I/O functions readb etc, which transfer data without any +conversion from/to UTF-8. + +In a non UTF-8 locale read and readb, Tofile and Tofileb, etc. do not +differ in their results. + diff --git a/miralib/manual/31/contents b/miralib/manual/31/contents new file mode 100644 index 0000000..ef9fdbd --- /dev/null +++ b/miralib/manual/31/contents @@ -0,0 +1,12 @@ +_U_N_I_X_/_M_i_r_a_n_d_a_ _s_y_s_t_e_m_ _i_n_t_e_r_f_a_c_e_ _i_n_f_o_r_m_a_t_i_o_n + + 1. Input from UNIX files etc + 2. Output to UNIX files etc + 3. Reading with interpretation (`_r_e_a_d_v_a_l_s' and $+) + 4. Using Miranda to build UNIX commands + 5. How to change the default editor + 6. How to alter sizes of workspaces + 7. Options, setup files etc + 8. Environment variables used by Miranda + 9. Input/Output of binary data + -- cgit v1.2.1