From 72386a1678a0cac81b865e4ff1c7991578b9b0f3 Mon Sep 17 00:00:00 2001
From: Jakob Kaivo <jakob@kaivo.net>
Date: Mon, 12 Nov 2018 10:42:20 -0500
Subject: split into sections

---
 README.md | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'README.md')

diff --git a/README.md b/README.md
index 43b5468..b7f01fc 100644
--- a/README.md
+++ b/README.md
@@ -1,18 +1,28 @@
 # freeonebook
 
+## Compiling
+
 In order to compile this, you will need an ARM cross compiler (unless you are
 building natively on ARM, in which case skip this step). On Debian, this is
 easy with:
 
-    $ sudo apt install gcc-arm-linux-gnueabihf
+    $ sudo apt install gcc-arm-linux-gnueabihf make
 
 To compile, simply run `make`.
 
     $ make
 
-Then copy freeonebook to `.a001` on your SD card:
+## Installing
+
+Copy `freeonebook` to `.a001` on your SD card:
 
     $ cp freeonebook /path/to/sd/.a001
 
+## Using
+
 Insert your SD card into your eOneBook and open it up. The program will run
 automatically.
+
+At present, the program is in pre-alpha state and simply initializes the
+display, logs button presses to `stdout`, and cleanly shuts down when requested
+by closing the eOneBook. Don't expect much.
-- 
cgit v1.2.1